Most riders are under the assumption when it comes to changing their bikes oil filter, choices are limited to OEM and aftermarket manufacturers of paper filters when that is simply not the case. Also available are reusable micronic stainless steel oil filters that will fit a wide range of applications including street bikes, dirt bikes, and ATVs. Over the years their filters have been proven in thousands of vehicle applications, on the street, in the dirt, and on numerous racetracks.

Superior Filtration:

This should be the last oil filter you will ever buy! Made from laser cut, medical grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area in many cases. Most good paper filters will pass particles in the 90 to 95 micron range, and some tested, as much as 300 microns. Sand is about 125 microns and a white blood cell approximately 25 microns. Our stainless filter catches items down to 35 microns "absolute", which is about 3 times better than most good paper or brass filters. The pleat seam is welded, able to withstand up to 600 degrees in our filter, not glued, like paper filters.

Cleanable and reusable:

Simply remove the filter, rinse in clean solvent and replace it, you're done. The filter can be cleaned with solvent, kerosene, aerosol carburetor cleaner, or any other degreasing agent, even common dish soap. You can even blow air through the filter from the inside out to remove any small particles or cleaning agent from the screen if you so desire.

Consistent flow under all conditions:

Stainless steel will stand up to the stress of heat, high pressure and physical handling much better than paper or brass. This filter maintains consistent flow under all conditions including cold start ups and or under extreme heat. A one inch square of this micron filter material will flow 1.9 gallons of 90 weight oil per minute at only 1 psi pump pressure (70 degrees F). Our typical filter size is 30 sq. in. which equals the flow of 57 gallons per minute. Standard paper filters do not flow well when the oil is cold, often causing the bypass valve to open allowing unfiltered oil to enter your engine.

Environmental benefits:

In addition to all the other benefits, our filter helps keep the land fills free of old used filters.

Proudly made in the USA.

Click below for printable PDF application chart.

Offroad

Street

ATV

Requires Adobe reader. Click here to download Adobe reader free. You do not need to install Google toolbar.

Don't see your filter in our list? Contact us with your part number and we'll order it up for you